Pick your path and follow the steps. Five minutes, start to finish.
Connect via USB-C. The display will power on and show a WiFi setup screen.
Your device creates a hotspot called "pebl-setup" and shows a QR code on the e-paper display. Scan the QR code with your phone to connect, then open Settings › WiFi on your phone — a setup page will appear where you enter your home WiFi credentials.
Add pebl to your Slack workspace or Discord server at pebl.ink/connect.
Once connected, the display shows an 8-character pairing code (e.g. ABCD-1234). In Slack, open the App Home tab and tap "Link Device", then enter the code. For Discord, run the /link command and enter it in the modal.
React to any message and it appears on the display instantly. Works with Slack and Discord. Hold the BOOT button on your device to add another platform later.
Install PlatformIO CLI and connect your board via USB-C. Clone the repo, then run ./flash.sh — it will prompt you to choose a device name, display variant, and rotation. Use --dry-run to preview the config before flashing.
Once flashed, your device creates a hotspot called "pebl-setup" and shows a QR code on the e-paper display. Scan the QR code with your phone to connect, then open Settings › WiFi on your phone — a setup page will appear where you enter your home WiFi credentials.
The display shows an 8-character pairing code (e.g. ABCD-1234). In Slack, open the App Home tab and tap "Link Device", then enter the code. For Discord, run the /link command. Your 7-day free trial starts automatically.
Your trial runs for 7 days with full access. When you're ready, grab a $10 key. Yours forever, no subscriptions.
Stuck? Check the support page or open an issue.